Stain Remover

Stain Remover

Removes

·     dispersion and varnish paints, and various kinds of graffiti

• waxes, tar, grease, oil, silicon.

Suitable for exterior and interior use. Suitable for fade and water proof surfaces like tiles, Cotto, clay and brick clay slabs, marble, nature stone, granite, shale, concrete blocks, porcelain stoneware and all ceramic surfaces.

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Dewaxing Detergent and Oil Remover

Dewaxing Detergent and Oil Remover

Cleans solvent resistant surfaces e.g. Cotto, brick clay slabs, marble, granite, sand stone and other nature stones

·                                                                                                   any wax film

·                                                                                                   oil-based treatments

·                                                                                                   as well as wrongly applied color enhancer

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Outdoor cleaner special

Outdoor cleaner special Cleans all outdoor ceramic and stone surfaces from ·                                                                                                   Algae and moss ·                                                                                                   Weather stains ·                                                                                                   Stains from leaves etc. Suitable for all outdoor ceramic and stone surfaces. Outdoor cleanser special removes normal stains as well as stains caused by weather like algae, moss and stains on concrete, block paving, terraces, facades, sidewalks, masonry etc. Also suitable for stains from leaves etc. Store and transport in an upright position. Dosage: 1 l for approx. 5 –10 m2, depending on pollution level and stone type.

Non-Slip

Non-Slip

Non-slip treatment for flat and polished surfaces

Suitable for exterior and interior use. Patina-Fala^® Non-Slip is a fluoride-containing product, non-slipping on wet surfaces and suitable for interior and exterior use on ceramic surfaces like tiles, stoneware, polished porcelain stoneware, glazed mosaics, porcelain, marble, granite and other nature stones with flat and polished surfaces, as well as on enameled surfaces like shower trays and bath tubes etc. Not suitable for synthetic surfaces. Advice: Glossy surfaces become matt. However, the color is nearly unaffected.

Dosage: 0.2 liters for approx. 1.5 – 2 m²  , 5 liters for approx. 50 m², depending on surface

Alkaline Special Product

Alkaline Special Product (together with the Acidic Special Product) »Alkaline« and »Acidic« removes: Toughest construction pollution and silification Stains on polished porcelain stoneware Damages of impregnation Suitable for exterior and interior use. This Special Product may only be used on acid- and alkali-resistant surfaces and only as specified with Patina-Fala® Acidic Special Product in the following order: a.) Alkali and b.) Acidic. Both are special cleaners that remove silification from Cotto, clay and brick clay slabs, and any kind of stains e.g. also on polished porcelain stoneware, granite and all hard stones etc. Only for industrial use. Dosage: 1 l for approx. 5 m²

Acid-tec porcelain stoneware-basic cleaner *new*

Acid-tec porcelain stoneware-basic cleaner

Also for stoneware and acid-resistant natural stones

• Immediately effective
• Dissolves tough stains and toughest lime soap residuals

For exterior and interior use. Acid-tec removes all types of fouling, toughest lime and lime soap residuals, as well as residuals of synthetic resin adhesives and seam sealant. Suitable for porcelain stoneware, stoneware, tiles and acid-resistant nature stones. Also suitable for sanitary areas. The product is environmentally friendly, easy biodegradable, contains no formaldehyde, halogens, nitrogen, and protects against corrosion.

Dosage: 1 l for approx. 10-40 m², depending on pollution level.

Acid-washing-special

Acid-washing special

Used to acid-wash strongest toughest bloomings, construction residuals e.g. concrete and lime residuals on

• Cotto, clay and brick clay slabs
• Ceramic surfaces, granite
• Any acid resistant surface

For exterior and interior use. Do not use on cement-bonded slabs, marble and acid-sensitive surfaces or objects.

Dosage: 1 l for approx. 5-10 m², depending on pollution level.

Wipe-On-Care nature clean

Wipe-On-Care nature clean

Bio-constructive cleaning and care of

• Cotto, clay and brick clay slabs
• wooden floors

·         any wax treated surfaces

Suitable for interior use. This high-quality wipe-on-care nature clean leaves a protective film with a silk-matt shine. Repolish occasionally.

Dosage: 100 – 200 ml for 8 liters water.

Wipe-On-Care

Wipe-On-Care Traditional cleaning and care for Cotto, clay and brick clay slabs wooden floors ·         any wax treated surfaces Suitable for interior use. This high-quality wipe-on-care leaves a protective film with a silk-matt shine. Repolish occasionally. Dosage: 100 – 200 ml for 8 liters water.

Unica nature (leaves luster)

Unica nature (leaves luster)

Hard coating

for Cotto, clinker, concrete blocks, marble, granite, shale and all unpolished nature stones

• no yellowing
• with stain protection
• very robust

Suitable for interior use. Patina-Fala ^®  Unica nature is suitable for absorbing, unglazed ceramic surfaces eg clinker, Cotto, clay and brick clay slabs, and concrete blocks. Unica nature gives also marble, shale, granite and other nature stones with a matt or structure surface a beautiful luster.  Unica nature should be used, if necessary, once or twice a month diluted in water.

Dosage: 1 l for approx. 10-15 m², eg for Cotto, clay and brick clay slabs. For clinker, marble or nature stone 1 liter for 30-50 m².