Rust Converter *new*

Rust Converter

Cleans all nature stones, hard stones, sand stone, concrete blocks and tiles from

• rust stains
• metal residuals and stains e.g. from iron fertilizer, garden furnitures or tools

·          Immediate and deep penetrating effect

Suitable for exterior and interior use. Patina-Fala^® Rust converter removes rust stains, other metal residuals and stains e.g. from iron fertilizer, garden furnitures or tools from granite, any kind of nature stone, sand stone, concrete blocks and tiles. It is acid-free and suitable for marble and lime.

Dosage: 0.2 liters for approx. 1.5-2 m², depending on surface.

Please contact us for further information and prices:

Rust Remover and Stone Cleaner

Rust Remover and Stone Cleaner Cleans hard stones and acid-resistant surfaces from ·                                                                                                   Rust stains ·                                                                                                   general construction pollution ·                                                                                                   grinding debris etc. For exterior and interior use. On hart stones like granite, gneiss, Serizzo, porphyry, quartzite and all acid-resistant surfaces. Dosage: 1 l for approx. 10– 20m2, depending on pollution level and stone type. Please contact us for further information and prices:

Marble and Nature Stone Cleaner – acid-free

 Marble and Nature Stone Cleaner – acid-free

Suitable for the construction clean-up and sanitary cleaner in wet areas on

• any type of marble, lime and soft stone
• sand stone, antique marble
• concrete blocks, agglo marble

For exterior and interior use. Marble and Nature Stone Cleaner is an alkaline, water-based cleaner for construction clean-up of all types of marble, lime and soft stone e.g. Solnhofer, Jurassic, rustic marble, Carrara, Pietra Serena, concrete blocks, sand stone, Terrazzo or agglo marble (artificial stone) etc., as well as sanitary cleaner for maintenance cleaning in wet areas against lime and soap residuals.

Dosage: Construction clean-up: 1 l for approx. ca. 10-20 m², depending on pollution level and stone type. Maintenance cleaning in wet areas: 100 – 200 ml for 8 l water.

Please contact us for further information and prices:

Basic Cleaner Special

Basic Cleaner Special Cleans porcelain stoneware, tiles, unglazed ceramic surfaces, marble and nature stones from tough old stains toughest polymer stains residuals of wax and care products etc. For exterior and interior use. Basic Cleaner Special for glazed and unglazed stoneware tiles, porcelain stoneware, Cotto, clay, brick clay slabs and synthetic surfaces. Dosage: 1 l for approx. 5-10 m², depending on pollution level. Please contact us for further information and prices:

Basic Cleaner G2 and epoxy refresher

Basic Cleaner G2 and epoxy refresher

• glazed und unglazed stoneware tiles
• porcelain stoneware glass mosaic and granite

For exterior and interior use. Removes toughest stains, polymer and wax coatings as well as most epoxy seam sealants within 24 hours after application.

Dosage: 1 l for approx. 5 -10 m², depending on pollution level.


Please contact us for further information and prices:

Stain Remover

Stain Remover

Removes

·     dispersion and varnish paints, and various kinds of graffiti

• waxes, tar, grease, oil, silicon.

Suitable for exterior and interior use. Suitable for fade and water proof surfaces like tiles, Cotto, clay and brick clay slabs, marble, nature stone, granite, shale, concrete blocks, porcelain stoneware and all ceramic surfaces.

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Dewaxing Detergent and Oil Remover

Dewaxing Detergent and Oil Remover

Cleans solvent resistant surfaces e.g. Cotto, brick clay slabs, marble, granite, sand stone and other nature stones

·                                                                                                   any wax film

·                                                                                                   oil-based treatments

·                                                                                                   as well as wrongly applied color enhancer

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Outdoor cleaner special

Outdoor cleaner special Cleans all outdoor ceramic and stone surfaces from ·                                                                                                   Algae and moss ·                                                                                                   Weather stains ·                                                                                                   Stains from leaves etc. Suitable for all outdoor ceramic and stone surfaces. Outdoor cleanser special removes normal stains as well as stains caused by weather like algae, moss and stains on concrete, block paving, terraces, facades, sidewalks, masonry etc. Also suitable for stains from leaves etc. Store and transport in an upright position. Dosage: 1 l for approx. 5 –10 m2, depending on pollution level and stone type.

Non-Slip

Non-Slip

Non-slip treatment for flat and polished surfaces

Suitable for exterior and interior use. Patina-Fala^® Non-Slip is a fluoride-containing product, non-slipping on wet surfaces and suitable for interior and exterior use on ceramic surfaces like tiles, stoneware, polished porcelain stoneware, glazed mosaics, porcelain, marble, granite and other nature stones with flat and polished surfaces, as well as on enameled surfaces like shower trays and bath tubes etc. Not suitable for synthetic surfaces. Advice: Glossy surfaces become matt. However, the color is nearly unaffected.

Dosage: 0.2 liters for approx. 1.5 – 2 m²  , 5 liters for approx. 50 m², depending on surface

Alkaline Special Product

Alkaline Special Product (together with the Acidic Special Product) »Alkaline« and »Acidic« removes: Toughest construction pollution and silification Stains on polished porcelain stoneware Damages of impregnation Suitable for exterior and interior use. This Special Product may only be used on acid- and alkali-resistant surfaces and only as specified with Patina-Fala® Acidic Special Product in the following order: a.) Alkali and b.) Acidic. Both are special cleaners that remove silification from Cotto, clay and brick clay slabs, and any kind of stains e.g. also on polished porcelain stoneware, granite and all hard stones etc. Only for industrial use. Dosage: 1 l for approx. 5 m²

Acid-tec porcelain stoneware-basic cleaner *new*

Acid-tec porcelain stoneware-basic cleaner

Also for stoneware and acid-resistant natural stones

• Immediately effective
• Dissolves tough stains and toughest lime soap residuals

For exterior and interior use. Acid-tec removes all types of fouling, toughest lime and lime soap residuals, as well as residuals of synthetic resin adhesives and seam sealant. Suitable for porcelain stoneware, stoneware, tiles and acid-resistant nature stones. Also suitable for sanitary areas. The product is environmentally friendly, easy biodegradable, contains no formaldehyde, halogens, nitrogen, and protects against corrosion.

Dosage: 1 l for approx. 10-40 m², depending on pollution level.