Etchant colorless (nature)

Etchant colorless (nature)

Suitable for interior use. The product is liquid and used to patinate Cotto floors, Cotto with rough surface, clay and brick clay slabs and also antique marble which are subsequently treated with Patina-Fala^® Deck wax (paste-like) and polished. It leaves a beautiful silk luster. If desired, stain protection may be applied as specified the day before

No risk of frost.

Dosage: 2.5 l for approx. 25 m² depending on absorptive capacity.

Concrete Refresher and Descaler

Concrete Refresher and Descaler

• for acid-resistant surfaces
• tough construction pollution
• residuals from lime and seam sealant

For exterior and interior use. Concrete Refresher and Descaler is an outstanding acidic cleaner to remove residuals from concrete, lime, seam sealant and general construction pollution during construction clean-up as well as upon renovations and restorations. Only suitable for acid-resistant surfaces e.g. tiles and stone floors (not suitable for concrete slabs or blocks, marble and artificial stones)

Dosage: 1 l for approx. 10-20 m², depending on pollution level.

Concrete Joint Cleaner

Concrete Joint Cleaner

·                                                                                                   perfect clean joints

·                                                                                                   fast effect

For exterior and interior use. Concrete joint cleaner removes deposits from joints. The joints become again even in color and hygienically clean. Also suitable for colored concrete joints.

Dosage: 0.5 l for approx. 30-50 linear meters, depending on the joint width.

Wipe-On-Care

Wipe-On-Care

Traditional cleaning and care for

• Cotto, clay and brick clay slabs
• wooden floors

·         any wax treated surfaces

Suitable for interior use. This high-quality wipe-on-care leaves a protective film with a silk-matt shine. Repolish occasionally.

Dosage: 100 – 200 ml for 8 liters water.

Mold Remover

Mold Remover

Suitable for interior and exterior removal of mold from all ceramic tiles and stone surfaces like granite, marble and other nature stones, mosaic surfaces, glass mosaics and glass e.g. in saunas, swimming pools, massage rooms, dressing rooms, showers, baths, toilette facilities etc.

Store and transport in an upright position.

Dosage: 0.5 liter for approx. 4 –6 m², depending on mold infestation.

Rust Remover and Stone Cleaner

Rust Remover and Stone Cleaner

Cleans hard stones and acid-resistant surfaces from

Rust stains

·  general construction pollution

· grinding debris etc.

For exterior and interior use. 

On hart stones like granite, gneiss,

 Serizzo, porphyry, quartzite and all acid-resistant surfaces.

Dosage: 1 l for approx. 10– 20m², depending on pollution level and stone type.

Neutral Cleaner (pH 6.5-7.0)

Neutral Cleaner (pH 6.5-7.0)

Gentle, low-foam and streak-free

• Tiles, nature or artificial stone floors
• laminate floors and all synthetic surfaces
• pleasant smell, antistatic

Suitable for interior use. Neutral Cleaner is a cleaner with an outstanding streak-free and gentle cleaning power. Suitable for e.g. tile and stone floors, sanitary facilities, nature stones, synthetic furnitures, synthetic floors, other flat and water-proofed surfaces. Especially suitable for laminate and wooden floors (Wipe with damp cloth only!).

Dosage: 50 –100 ml for 8 l water.

Marble and Nature Stone Cleaner – acid-free

Marble and Nature Stone Cleaner – acid-free

Suitable for the construction clean-up and sanitary cleaner in wet areas on

• any type of marble, lime and soft stone
• sand stone, antique marble
• concrete blocks, agglo marble

For exterior and interior use. Marble and Nature Stone Cleaner is an alkaline, water-based cleaner for construction clean-up of all types of marble, lime and soft stone e.g. Solnhofer, Jurassic, rustic marble, Carrara, Pietra Serena, concrete blocks, sand stone, Terrazzo or agglo marble (artificial stone) etc., as well as sanitary cleaner for maintenance cleaning in wet areas against lime and soap residuals.

Dosage: Construction clean-up: 1 l for approx. ca. 10-20 m², depending on pollution level and stone type. Maintenance cleaning in wet areas: 100 – 200 ml for 8 l water.

 

 

 

Marble and Nature Stone Wipe-On-Care

Marble and Nature Stone Wipe-On-Care

Cleans and cares at the same time

• Best care
• High cleaning power

Suitable for interior use. Marble and Nature Stone Wipe-On-Care is an outstanding cleaning and care product. The regular application assures a non-slip floor covering. Furthermore, selected quality waxes give a well-cared appearance to your marble and nature stone floor.

Dosage: 50-100 ml for 8 l water