Concrete Joint Cleaner

Concrete Joint Cleaner

·                                                                                                   perfect clean joints

·                                                                                                   fast effect

For exterior and interior use. Concrete joint cleaner removes deposits from joints. The joints become again even in color and hygienically clean. Also suitable for colored concrete joints.

Dosage: 0.5 l for approx. 30-50 linear meters, depending on the joint width.

Mold Remover

Mold Remover Suitable for interior and exterior removal of mold from all ceramic tiles and stone surfaces like granite, marble and other nature stones, mosaic surfaces, glass mosaics and glass e.g. in saunas, swimming pools, massage rooms, dressing rooms, showers, baths, toilette facilities etc. Store and transport in an upright position. Dosage: 0.5 liter for approx. 4 –6 m2, depending on mold infestation.

Please contact us for further information and prices:

Acidic Special Product

Acidic Special Product (in combination with Alkaline Special Product) »Alkaline« and »Acidic« removes: toughest construction pollution and silification Stains on polished porcelain stoneware Damages of impregnation Suitable for exterior and interior use. This Special Product may only be used on acid-resistant surfaces and only as specified with Patina-Fala® Alkaline Special Product in the following order: a.) Alkali and b.) Acidic. Both are special cleaners that remove silification from Cotto, clay and brick clay slabs, and any kind of stains e.g. also on polished porcelain stoneware, granite and all hard stones etc. Only for industrial use. Dosage: 1 l for approx. 5 m²

Please contact us for further information and prices:

Rust Converter *new*

Rust Converter

Cleans all nature stones, hard stones, sand stone, concrete blocks and tiles from

• rust stains
• metal residuals and stains e.g. from iron fertilizer, garden furnitures or tools

·          Immediate and deep penetrating effect

Suitable for exterior and interior use. Patina-Fala^® Rust converter removes rust stains, other metal residuals and stains e.g. from iron fertilizer, garden furnitures or tools from granite, any kind of nature stone, sand stone, concrete blocks and tiles. It is acid-free and suitable for marble and lime.

Dosage: 0.2 liters for approx. 1.5-2 m², depending on surface.

Please contact us for further information and prices:

Rust Remover and Stone Cleaner

Rust Remover and Stone Cleaner Cleans hard stones and acid-resistant surfaces from ·                                                                                                   Rust stains ·                                                                                                   general construction pollution ·                                                                                                   grinding debris etc. For exterior and interior use. On hart stones like granite, gneiss, Serizzo, porphyry, quartzite and all acid-resistant surfaces. Dosage: 1 l for approx. 10– 20m2, depending on pollution level and stone type. Please contact us for further information and prices:

Marble and Nature Stone Cleaner – acid-free

 Marble and Nature Stone Cleaner – acid-free

Suitable for the construction clean-up and sanitary cleaner in wet areas on

• any type of marble, lime and soft stone
• sand stone, antique marble
• concrete blocks, agglo marble

For exterior and interior use. Marble and Nature Stone Cleaner is an alkaline, water-based cleaner for construction clean-up of all types of marble, lime and soft stone e.g. Solnhofer, Jurassic, rustic marble, Carrara, Pietra Serena, concrete blocks, sand stone, Terrazzo or agglo marble (artificial stone) etc., as well as sanitary cleaner for maintenance cleaning in wet areas against lime and soap residuals.

Dosage: Construction clean-up: 1 l for approx. ca. 10-20 m², depending on pollution level and stone type. Maintenance cleaning in wet areas: 100 – 200 ml for 8 l water.

Please contact us for further information and prices:

Basic Cleaner Special

Basic Cleaner Special Cleans porcelain stoneware, tiles, unglazed ceramic surfaces, marble and nature stones from tough old stains toughest polymer stains residuals of wax and care products etc. For exterior and interior use. Basic Cleaner Special for glazed and unglazed stoneware tiles, porcelain stoneware, Cotto, clay, brick clay slabs and synthetic surfaces. Dosage: 1 l for approx. 5-10 m², depending on pollution level. Please contact us for further information and prices:

Basic Cleaner G2 and epoxy refresher

Basic Cleaner G2 and epoxy refresher

• glazed und unglazed stoneware tiles
• porcelain stoneware glass mosaic and granite

For exterior and interior use. Removes toughest stains, polymer and wax coatings as well as most epoxy seam sealants within 24 hours after application.

Dosage: 1 l for approx. 5 -10 m², depending on pollution level.


Please contact us for further information and prices:

Stain Remover

Stain Remover

Removes

·     dispersion and varnish paints, and various kinds of graffiti

• waxes, tar, grease, oil, silicon.

Suitable for exterior and interior use. Suitable for fade and water proof surfaces like tiles, Cotto, clay and brick clay slabs, marble, nature stone, granite, shale, concrete blocks, porcelain stoneware and all ceramic surfaces.

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Dewaxing Detergent and Oil Remover

Dewaxing Detergent and Oil Remover

Cleans solvent resistant surfaces e.g. Cotto, brick clay slabs, marble, granite, sand stone and other nature stones

·                                                                                                   any wax film

·                                                                                                   oil-based treatments

·                                                                                                   as well as wrongly applied color enhancer

Dosage: 1 liter for approx. 5-10 m², depending on pollution level.

Outdoor cleaner special

Outdoor cleaner special Cleans all outdoor ceramic and stone surfaces from ·                                                                                                   Algae and moss ·                                                                                                   Weather stains ·                                                                                                   Stains from leaves etc. Suitable for all outdoor ceramic and stone surfaces. Outdoor cleanser special removes normal stains as well as stains caused by weather like algae, moss and stains on concrete, block paving, terraces, facades, sidewalks, masonry etc. Also suitable for stains from leaves etc. Store and transport in an upright position. Dosage: 1 l for approx. 5 –10 m2, depending on pollution level and stone type.

Non-Slip

Non-Slip

Non-slip treatment for flat and polished surfaces

Suitable for exterior and interior use. Patina-Fala^® Non-Slip is a fluoride-containing product, non-slipping on wet surfaces and suitable for interior and exterior use on ceramic surfaces like tiles, stoneware, polished porcelain stoneware, glazed mosaics, porcelain, marble, granite and other nature stones with flat and polished surfaces, as well as on enameled surfaces like shower trays and bath tubes etc. Not suitable for synthetic surfaces. Advice: Glossy surfaces become matt. However, the color is nearly unaffected.

Dosage: 0.2 liters for approx. 1.5 – 2 m²  , 5 liters for approx. 50 m², depending on surface

Alkaline Special Product

Alkaline Special Product (together with the Acidic Special Product) »Alkaline« and »Acidic« removes: Toughest construction pollution and silification Stains on polished porcelain stoneware Damages of impregnation Suitable for exterior and interior use. This Special Product may only be used on acid- and alkali-resistant surfaces and only as specified with Patina-Fala® Acidic Special Product in the following order: a.) Alkali and b.) Acidic. Both are special cleaners that remove silification from Cotto, clay and brick clay slabs, and any kind of stains e.g. also on polished porcelain stoneware, granite and all hard stones etc. Only for industrial use. Dosage: 1 l for approx. 5 m²

Acid-tec porcelain stoneware-basic cleaner *new*

Acid-tec porcelain stoneware-basic cleaner

Also for stoneware and acid-resistant natural stones

• Immediately effective
• Dissolves tough stains and toughest lime soap residuals

For exterior and interior use. Acid-tec removes all types of fouling, toughest lime and lime soap residuals, as well as residuals of synthetic resin adhesives and seam sealant. Suitable for porcelain stoneware, stoneware, tiles and acid-resistant nature stones. Also suitable for sanitary areas. The product is environmentally friendly, easy biodegradable, contains no formaldehyde, halogens, nitrogen, and protects against corrosion.

Dosage: 1 l for approx. 10-40 m², depending on pollution level.

Acid-washing-special

Acid-washing special

Used to acid-wash strongest toughest bloomings, construction residuals e.g. concrete and lime residuals on

• Cotto, clay and brick clay slabs
• Ceramic surfaces, granite
• Any acid resistant surface

For exterior and interior use. Do not use on cement-bonded slabs, marble and acid-sensitive surfaces or objects.

Dosage: 1 l for approx. 5-10 m², depending on pollution level.

Wipe-On-Care nature clean

Wipe-On-Care nature clean

Bio-constructive cleaning and care of

• Cotto, clay and brick clay slabs
• wooden floors

·         any wax treated surfaces

Suitable for interior use. This high-quality wipe-on-care nature clean leaves a protective film with a silk-matt shine. Repolish occasionally.

Dosage: 100 – 200 ml for 8 liters water.

Wipe-On-Care

Wipe-On-Care Traditional cleaning and care for Cotto, clay and brick clay slabs wooden floors ·         any wax treated surfaces Suitable for interior use. This high-quality wipe-on-care leaves a protective film with a silk-matt shine. Repolish occasionally. Dosage: 100 – 200 ml for 8 liters water.

Unica nature (leaves luster)

Unica nature (leaves luster)

Hard coating

for Cotto, clinker, concrete blocks, marble, granite, shale and all unpolished nature stones

• no yellowing
• with stain protection
• very robust

Suitable for interior use. Patina-Fala ^®  Unica nature is suitable for absorbing, unglazed ceramic surfaces eg clinker, Cotto, clay and brick clay slabs, and concrete blocks. Unica nature gives also marble, shale, granite and other nature stones with a matt or structure surface a beautiful luster.  Unica nature should be used, if necessary, once or twice a month diluted in water.

Dosage: 1 l for approx. 10-15 m², eg for Cotto, clay and brick clay slabs. For clinker, marble or nature stone 1 liter for 30-50 m².

Marble and Nature Stone Wipe-On-Care

Marble and Nature Stone Wipe-On-Care

Cleans and cares at the same time

• Best care
• High cleaning power

Suitable for interior use. Marble and Nature Stone Wipe-On-Care is an outstanding cleaning and care product. The regular application assures a non-slip floor covering. Furthermore, selected quality waxes give a well-cared appearance to your marble and nature stone floor.

Dosage: 50-100 ml for 8 l water

Floor soap

Floor soap Soap cleaner for floors Cleans and cares at the same time unglazed ceramic surfaces ·         Matt nature stones and wooden floors Suitable for interior use. Floor soap is a cleaner with skin protection based on natural fatty acids. Suitable for the use e.g. on unglazed ceramic surfaces like clinker, Cotto, clay and brick clay slabs as well matt nature stones which were treated with Patina-Fala® Stain Protection, Protect nature, Color Enhancer or Protective. Dosage:100-150 ml for 8 l water.

Unica nature (leaves luster)

Unica nature (leaves luster)

Hard coating for Cotto, clinker, concrete blocks, marble, granite, shale and all unpolished nature stones

• no yellowing
• with stain protection
• very robust

Suitable for interior use. Patina-Fala^® Unica nature is suitable for absorbing, unglazed ceramic surfaces e.g. clinker, Cotto, clay and brick clay slabs, and concrete blocks. Unica nature gives also marble, shale, granite and other nature stones with a matt or structure surface a beautiful luster. Unica nature should be used, if necessary, once or twice a month diluted in water.

Dosage: 1 l for approx. 10-15 m², e.g. for Cotto, clay and brick clay slabs. For clinker, marble or nature stone 1 liter for 30-50 m².

Impregnation (Joint Aid)

Impregnation (Joint Aid)

• Suitable for any strong absorbing surfaces
• Surface stays breathable
• No discoloring or yellowing.

Suitable for exterior and interior use. The impregnation is liquid, colorless and is used for strong absorbing surfaces e.g. on Cotto, clay and brick clay slabs or limestone. It prevents contamination and water absorption of the surface.

Dosage: 1 l for approx. 10 m².

Protectiv *new*

Protective

(High Performance Stain Protection)

• Strong water, grease and oil repellent
• solvent-free
• Best resistance

Suitable for exterior and interior use. This High Performance Stain Protection protects all strong absorbing surfaces like marble and nature stone, especially China granite, sand stone, limestone, unglazed ceramic surfaces like Cotto, clay and brick clay slabs, clinker, concrete blocks, Terrazzo, garden and side walk slabs against general contamination, grease and oil, even for heavy wear. The surface stays breathable and optically unchanged.

Not suitable for highly polished surfaces.

Dosage: 1 liter for approx. 5-10 m² limestone or concrete blocks and up to 30 m² for granite, depending on absorbency.

Protect nature (leaves no luster)

Protect nature (leaves no luster)

Water-based Stain Protection

Suitable for strong absorbing unglazed ceramic and nature stone surfaces, porcelain stoneware, marble and nature stone ware

• Water, oil and grease repellent
• solvent-free

 No discoloration

Suitable for exterior and interior use. Especially suitable for surface treatment of porous surfaces. Protect nature protects unglazed ceramic surfaces like Cotto, clay and brick clay slabs, marble, granite and other nature stones, clinker, sand stone, concrete blocks, agglo marble, Terrazzo, mosaics, stoneware and porcelain stoneware against general contaminations, grease and oil. Protect nature may be used as impregnation for absorbing surfaces before jointing.

Dosage: 1 liter for approx. 10 m² e.g. for Cotto. For porcelain stoneware or granite 1 liter for approx. 30 m².

Joint Protection *new*

Joint Protection

• for all concrete joints
• no surface or color change
• protects against contamination of any kind

Suitable for exterior and interior use. Joint Protection is the perfect protection for all concrete joints like flexible joints, nature stone joints as well as nano-technological joints for tiles and mosaics. Not suitable for epoxy resin joints. The joints are protected against oil, grease and general contaminations. Surface contaminations can be easily cleaned.

Dosage: 0.2 l for: mosaics up to approx. 20x20 mm for approx. 5-10 m² or for approx. 30-50 linear meters joint, depending on joint width and sealant.

Finale (for high gloss)

Finale (for high gloss)

Wax containing treatment for

• Cotto, clay and brick clay slabs
• marble, granite and other nature stone surface
• Also suitable for synthetics, laminate, wood and parquet floor

Suitable for interior use. Finale is a liquid, wax containing product which leaves after polishing and hardening a very robust, high-gloss surface.

Dosage: 1 l for approx. 20-30 m².

Stain Protection

Stain Protection

Protects without change unglazed ceramic surfaces, porcelain stoneware, Cotto, clay and brick clay slabs, clinker, marble, nature stone, sand stone, concrete blocks, Terrazzo etc. against general contamination, oil and grease.

·                                                                                                   Stain protection with nano particles

^·                                                                                                    Low dosage – 1 liter for up to 40 m²

1 liter for approx. 8-20 m² e.g. for sand stone, concrete blocks, nature stones or Cotto depending on absorptive capacity. For porcelain stoneware and hard stones 1 liter for approx. 40 m²

Color Enhancer

Color Enhancer

Suitable for all types of soft and hard stones. Also suitable for bricks and other absorbing surfaces e.g. concrete blocks, sand stone, Terrazzo, Jurassic or Solnhofer.

·  Impressively enhances color and structure

· with stain protection

^·   low dosage – 1 liter for up to 20 m²

Suitable for exterior and interior use.Dosage: 1 l for approx. 10-20 m², depending on absorbency.

Deck wax colorless nature/nature clear

Deck wax colorless nature/nature clear

Bio-constructive nature clear wax treatment for:

• Cotto, clay and brick clay slabs
• Shale, concrete blocks, antique marble
• sand stone, nature stone, wooden floors etc.

Suitable for interior use. Deck wax colorless nature/nature clear is viscous and used to patinate Cotto, clay and brick clay slabs, shale, concrete blocks, sand stone, antique marble, nature stones and wooden floors as well as to rewax.

No risk of frost.Dosage: 2.5 l for approx. 25m²

Deck wax colorless (paste-like - in combination with etchants)

Deck wax colorless (paste-like - in combination with etchants)

Suitable for interior use. Deck wax is paste-like and suitable to wax Cotto, clay and brick clay slab surfaces or also antique marble and is used in combination with etchants colorless, medium (light) or rustic (dark). Please observe the respective application instructions. It leaves a silk luster. Especially suitable for rewaxing.

No risk of frost.

Dosage: approx. 2.5 kg for approx. 50-80 m², depending on surface structure.

Etchant colorless (nature)

Etchant colorless (nature)

Suitable for interior use. The product is liquid and used to patinate Cotto floors, Cotto with rough surface, clay and brick clay slabs and also antique marble which are subsequently treated with Patina-Fala^® Deck wax (paste-like) and polished. It leaves a beautiful silk luster. If desired, stain protection may be applied as specified the day before

No risk of frost.

Dosage: 2.5 l for approx. 25 m² depending on absorptive capacity.

Concrete Refresher and Descaler

Concrete Refresher and Descaler

• for acid-resistant surfaces
• tough construction pollution
• residuals from lime and seam sealant

For exterior and interior use. Concrete Refresher and Descaler is an outstanding acidic cleaner to remove residuals from concrete, lime, seam sealant and general construction pollution during construction clean-up as well as upon renovations and restorations. Only suitable for acid-resistant surfaces e.g. tiles and stone floors (not suitable for concrete slabs or blocks, marble and artificial stones)

Dosage: 1 l for approx. 10-20 m², depending on pollution level.

Concrete Joint Cleaner

Concrete Joint Cleaner

·                                                                                                   perfect clean joints

·                                                                                                   fast effect

For exterior and interior use. Concrete joint cleaner removes deposits from joints. The joints become again even in color and hygienically clean. Also suitable for colored concrete joints.

Dosage: 0.5 l for approx. 30-50 linear meters, depending on the joint width.

Wipe-On-Care

Wipe-On-Care

Traditional cleaning and care for

• Cotto, clay and brick clay slabs
• wooden floors

·         any wax treated surfaces

Suitable for interior use. This high-quality wipe-on-care leaves a protective film with a silk-matt shine. Repolish occasionally.

Dosage: 100 – 200 ml for 8 liters water.

Mold Remover

Mold Remover

Suitable for interior and exterior removal of mold from all ceramic tiles and stone surfaces like granite, marble and other nature stones, mosaic surfaces, glass mosaics and glass e.g. in saunas, swimming pools, massage rooms, dressing rooms, showers, baths, toilette facilities etc.

Store and transport in an upright position.

Dosage: 0.5 liter for approx. 4 –6 m², depending on mold infestation.

Rust Remover and Stone Cleaner

Rust Remover and Stone Cleaner

Cleans hard stones and acid-resistant surfaces from

Rust stains

·  general construction pollution

· grinding debris etc.

For exterior and interior use. 

On hart stones like granite, gneiss,

 Serizzo, porphyry, quartzite and all acid-resistant surfaces.

Dosage: 1 l for approx. 10– 20m², depending on pollution level and stone type.