Floor soap

Floor soap Soap cleaner for floors Cleans and cares at the same time unglazed ceramic surfaces ·         Matt nature stones and wooden floors Suitable for interior use. Floor soap is a cleaner with skin protection based on natural fatty acids. Suitable for the use e.g. on unglazed ceramic surfaces like clinker, Cotto, clay and brick clay slabs as well matt nature stones which were treated with Patina-Fala® Stain Protection, Protect nature, Color Enhancer or Protective. Dosage:100-150 ml for 8 l water.

Unica nature (leaves luster)

Unica nature (leaves luster)

Hard coating for Cotto, clinker, concrete blocks, marble, granite, shale and all unpolished nature stones

• no yellowing
• with stain protection
• very robust

Suitable for interior use. Patina-Fala^® Unica nature is suitable for absorbing, unglazed ceramic surfaces e.g. clinker, Cotto, clay and brick clay slabs, and concrete blocks. Unica nature gives also marble, shale, granite and other nature stones with a matt or structure surface a beautiful luster. Unica nature should be used, if necessary, once or twice a month diluted in water.

Dosage: 1 l for approx. 10-15 m², e.g. for Cotto, clay and brick clay slabs. For clinker, marble or nature stone 1 liter for 30-50 m².

Impregnation (Joint Aid)

Impregnation (Joint Aid)

• Suitable for any strong absorbing surfaces
• Surface stays breathable
• No discoloring or yellowing.

Suitable for exterior and interior use. The impregnation is liquid, colorless and is used for strong absorbing surfaces e.g. on Cotto, clay and brick clay slabs or limestone. It prevents contamination and water absorption of the surface.

Dosage: 1 l for approx. 10 m².

Protectiv *new*

Protective

(High Performance Stain Protection)

• Strong water, grease and oil repellent
• solvent-free
• Best resistance

Suitable for exterior and interior use. This High Performance Stain Protection protects all strong absorbing surfaces like marble and nature stone, especially China granite, sand stone, limestone, unglazed ceramic surfaces like Cotto, clay and brick clay slabs, clinker, concrete blocks, Terrazzo, garden and side walk slabs against general contamination, grease and oil, even for heavy wear. The surface stays breathable and optically unchanged.

Not suitable for highly polished surfaces.

Dosage: 1 liter for approx. 5-10 m² limestone or concrete blocks and up to 30 m² for granite, depending on absorbency.

Protect nature (leaves no luster)

Protect nature (leaves no luster)

Water-based Stain Protection

Suitable for strong absorbing unglazed ceramic and nature stone surfaces, porcelain stoneware, marble and nature stone ware

• Water, oil and grease repellent
• solvent-free

 No discoloration

Suitable for exterior and interior use. Especially suitable for surface treatment of porous surfaces. Protect nature protects unglazed ceramic surfaces like Cotto, clay and brick clay slabs, marble, granite and other nature stones, clinker, sand stone, concrete blocks, agglo marble, Terrazzo, mosaics, stoneware and porcelain stoneware against general contaminations, grease and oil. Protect nature may be used as impregnation for absorbing surfaces before jointing.

Dosage: 1 liter for approx. 10 m² e.g. for Cotto. For porcelain stoneware or granite 1 liter for approx. 30 m².

Joint Protection *new*

Joint Protection

• for all concrete joints
• no surface or color change
• protects against contamination of any kind

Suitable for exterior and interior use. Joint Protection is the perfect protection for all concrete joints like flexible joints, nature stone joints as well as nano-technological joints for tiles and mosaics. Not suitable for epoxy resin joints. The joints are protected against oil, grease and general contaminations. Surface contaminations can be easily cleaned.

Dosage: 0.2 l for: mosaics up to approx. 20x20 mm for approx. 5-10 m² or for approx. 30-50 linear meters joint, depending on joint width and sealant.